Knowledge Center
Welcome to our Knowledge Center. Here our goal is to offer the user an easy way to navigate to all of our educational content.
Hydraulic Oil Testing: Best Practices & ISO Standards for Contamination Control
The ASTM D7596-14 (ASTM, 2018) was designed as a guide for the determination of particle concentration, particle size distribution, particle shape, and soot content for new and in service oils used for lubrication and hydraulic systems using a direct imaging integrated tester.
Revolutionizing Fluid Contamination Monitoring with Dynamic Image Analysis and ISO 21018-1
The ASTM D7596-14 (ASTM, 2018) was designed as a guide for the determination of particle concentration, particle size distribution, particle shape, and soot content for new and in service oils used for lubrication and hydraulic systems using a direct imaging integrated tester.
Water Quality Particulate Testing with a VIEW
Unlike traditional particle counting, which only provides information on particle size, dynamic image analysis provides detailed data on both particle size and shape. This allows for better identification of specific types of particles (e.g., fibrous, spherical, irregular), which can help in distinguishing between organic matter, sediment, or chemical precipitates.
Sodium Ion Battery Powders – Shape really matters…
Particle shape plays a critical role in the performance and manufacturing of sodium-based batteries, particularly when it comes to the powders used for electrodes. The shape of the particles impacts several key factors that influence the efficiency, safety, and durability of the battery.
Fuel and Lubrication ASTM D7596-14 Particle Test Method for Shape Classification of Oils
The ASTM D7596-14 (ASTM, 2018) was designed as a guide for the determination of particle concentration, particle size distribution, particle shape, and soot content for new and in service oils used for lubrication and hydraulic systems using a direct imaging integrated tester.
Particle Size and Shape of Petroleum Lost Circulation Material – #1
Lost Circulation Material (LCM) is an additive introduced to drilling fluid that can come in all different shapes and sizes. It is well understood that irregular particles have greater thickening and strength properties. As a result, analyzing size alone for selection of LCM materials would not be ideal. In this case, shape measurements such as Circularity and Smoothness as well as size, are key measurement parameters to monitor.
Fluid loss prevention and particle shape analysis
More videos on different Lost Circulation Material (LCM) which is an additive introduced to drilling fluid that can come in all different shapes and sizes. It is well understood that irregular particles have greater thickening and strength properties. As a result, analyzing size alone for selection of LCM materials would not be ideal. In this case, shape measurements such as Circularity and Smoothness as well as size, are key measurement parameters to monitor.
American Association of Drilling Engineers (AADE 24 FTCE) presentation
American Association of Drilling Engineers (AADE 24 FTCE) presentation
Send us a Message
Pre-sale requests and questions / general technical support Please email your request to one of these addresses, along with your contact information, or use the web form below. If asking about a software issue, please include the software version you are using. Sales inquiries and demo requests: sales (at) particleshape.com. Software questions and issues: support [...]
Customer Profile
[wppb-edit-profile]
Visit our YouTube Page
Particle Insight Raptor Portable Series
- Raptor – General Brochure
- Raptor – Fuel and Lubrication Edition
- Raptor – ASTM 7596-14 Compliance Document
- Raptor – Oil and Gas Edition
Hydro Insight Series
Particle Insight Sentinel Series
If you are looking for any specific document or information that you cannot find, please contact us and we will be able to answer your questions or even create any needed documentation.