Particle Analysis
What is Particle Analysis?
Particle analysis is the measurement of the physical properties of particles in a powder, suspension, emulsion, or fluid, most commonly their size, shape, and concentration. These properties control how a material flows, dissolves, packs, reacts, wears, and performs, which is why particle analysis is a core quality control tool in pharmaceuticals, chemicals, oil and fuel monitoring, additive manufacturing, mining, food, and life sciences.
This page is an introduction to particle analysis: what is measured, the main measurement techniques, how to choose between them, and where to go next for deeper guides.
On this page
- What Does Particle Analysis Measure?
Particle Size
Particle size is usually reported as a size distribution, the range of sizes present and how many particles (or how much volume) fall in each range, rather than a single number. Because real particles are rarely perfect spheres, size is typically expressed as an equivalent diameter, such as the diameter of a circle with the same projected area. Common summary values include D10, D50 (the median), and D90.Particle Shape
Shape describes how a particle deviates from a sphere. Typical shape parameters include circularity, aspect ratio (length vs. width), elongation, convexity, and roughness. Two samples can have identical size distributions and behave very differently because their particles have different shapes. Learn why particle shape matters.Particle Count and Concentration
For liquids such as injectable drugs, hydraulic fluids, and fuels, the key question is often how many particles are present per milliliter. Particle concentration is the basis of cleanliness standards such as ISO 4406 and pharmaceutical limits such as USP <788>. Read about particle count vs. concentration.- Why Particle Analysis Matters
- Product performance: Size and shape affect dissolution rate, bioavailability, flowability, packing density, and surface area.
- Quality control: Particle data verifies that each batch matches its specification and catches process drift early.
- Contamination monitoring: In oils, fuels, and injectables, particle counts reveal contamination, wear, and degradation.
- Regulatory compliance: Many industries are governed by standards that require particle testing, from USP <788> in pharmaceuticals to ISO 4406 in hydraulic systems.
- Common Particle Analysis Techniques
No single method is best for every material. Each technique measures particles differently, which is why results from different instruments do not always agree. Compare particle sizing methods in detail.
Sieve Analysis
One of the oldest methods, sieving separates particles by passing them through a stack of meshes. It is simple and inexpensive but slow, limited to larger particles, and provides no shape information.
Laser Diffraction
Laser diffraction calculates a size distribution from the pattern of light scattered by a cloud of particles. It is fast and covers a very wide size range, but it assumes particles are spherical and does not provide images, shape data, or particle counts.
Light Obscuration
Light obscuration counts and sizes particles as they block a light beam one at a time. It is widely used for particle counting in injectables and oils, but it measures size only and cannot tell a solid particle from an air bubble or droplet.
Image Analysis: Static and Dynamic
Image analysis measures particles directly from pictures. Static image analysis photographs particles at rest on a slide. Dynamic Image Analysis (DIA), also called flow imaging microscopy, images particles as they flow past a camera, measuring thousands of particles per minute. Because every particle is imaged, DIA delivers size, shape, and concentration at the same time, plus a thumbnail of each particle as visual evidence. See how Dynamic Image Analysis works.
Comparing Particle Analysis Methods
| Method | Size | Shape | Count / Concentration | Particle Images |
|---|---|---|---|---|
| Sieve analysis | Yes (coarse) | No | No | No |
| Laser diffraction | Yes | No | No | No |
| Light obscuration | Yes | No | Yes | No |
| Static image analysis | Yes | Yes | Limited | Yes |
| Dynamic Image Analysis | Yes | Yes | Yes | Yes |
- How to Choose a Method
- Do you need shape, or only size? If particle shape affects your product or you need to identify particle types, choose an imaging method.
- Is your sample a liquid or a dry powder? Some instruments handle only one; others, like the Raptor, are available for both wet and dry samples.
- Do you need particle counts? Contamination monitoring and compliance testing usually require concentration, not just a size distribution.
- Which standards apply? Your industry’s regulations may specify or favor particular methods.
- Do you need visual proof? Particle images make results easier to defend in audits and troubleshooting.
Already using laser diffraction? Hydro Insight adds particle imaging and shape analysis to the Malvern Mastersizer 3000.
- Particle Analysis Standards
- ISO 13322-2: Particle size analysis by dynamic image analysis methods.
- ISO 9276-6: Descriptive representation of particle shape and morphology.
- ISO 13320: Particle size analysis by laser diffraction.
- ISO 4406 and ASTM D7596: Fluid cleanliness codes and particle shape classification for oils. Read our fluid cleanliness standards guide.
- USP <788> and <1788>: Subvisible particulate matter in injectable drugs. Read our USP <788> and <1788> guide.
Explore Particle Analysis Topics
- Particle Size and Shape Basics: the fundamentals of particle characterization.
- Compare Particle Sizing Methods: strengths and limits of each technique.
- How Dynamic Image Analysis Works: image capture, measurement, and classification.
- Particle Shape Analysis: Expert Q&A: common questions about shape characterization.
- Why Particle Shape Matters: how morphology affects performance and quality.
- Knowledge Center: application notes, white papers, and videos.
- Frequently Asked Questions
What is the difference between particle size analysis and particle characterization?
Particle size analysis measures only size. Particle characterization is broader and includes size, shape, concentration, and sometimes optical properties such as opacity, giving a more complete picture of the material.
Why do different particle size analyzers give different results?
Each technique measures a different property and converts it to a size in its own way. Laser diffraction infers size from scattered light assuming spheres, while image analysis measures each particle’s projected outline. For non-spherical particles these approaches can produce noticeably different numbers, so it is important to compare results from the same method.
What is the best method for measuring particle shape?
Image analysis is the standard approach for particle shape. Dynamic Image Analysis is especially useful because it measures thousands of particles quickly and in random orientations, giving statistically meaningful shape distributions.
Can one instrument measure size, shape, and concentration?
Yes. Dynamic Image Analysis measures all three in a single run, and saves an image of every particle for review.
Talk to a Particle Characterization Expert
Not sure which method fits your material? Vision Analytical has been building particle size and shape analyzers for nearly two decades. Explore the Raptor product line, or contact us and we’ll help you choose the right approach, or run your sample for you.